Simple lighting circuits

Needing only two additional components, the AL5801 linear LED driver is designed to simplify automotive interior, signage and general lighting control circuits.  Integrating a 100V rated N-channel MOSFET with a pre-biased NPN transistor, this small footprint SOT26 packaged device will drive chains of up to 30 low-power, series-connected LEDs with currents from 20mA to 350mA.

The AL5801’s open-drain output operates between 1.1V and 100V, ensuring common 12V, 24V and 48V power rails are supported, while the LED current is set using an external low value resistor.  By generating a 0.56V reference voltage across the resistor, the driver’s internal control transistor helps minimize power losses and ensures sufficient supply voltage margin.

For applications requiring simple LED dimming, the driver supports PWM output-current regulation, achieved by driving its bias pin with a PWM signal via an external open-collector NPN transistor or open-drain N-channel MOSFET.