CML Microcircuits have recently released the CMX7031 and CMX7041 Multi-mode Two-way Radio (TWR) processors, operating in Marine VHF mode, have been enhanced to enable the ITU-R M.821 recommendation: Marine Digital Selective Calling (DSC) expansion sequences. Continuous transmission mode has also been included for use in distress alert situations.
Standard marine DSC only allows a position resolution down to approximately one nautical mile (1nmi). In distress situations this is not accurate enough to pin-point a precise position.
The DSC expansion sequences allow precise geographical coordinates to be transmitted, providing position accuracy to less than one metre (1m).
Imagine the situation of a diver in rough seas with strong currents, calling to be picked-up. Providing a 1 square nmi collection position will prolong recovery and potentially put the diver at risk.
A Marine VHF radio with the DSC expansion sequences enabled, would allow the diver to transmit an accurate collection position, down to 1 square metre, ensuring a safe and swift recovery.
The CMX7031 and CMX7041 Multi-mode Two-way Radio Processors are built on FirmASICcomponent technology allowing on-chip sub-systems to be reconfigured by a Function Image (FI).
These devices enable a revolutionary new platform approach to radio design, enabling multi-mode analogue two-way radios to be developed based on a single radio platform, conforming to many systems: PMR, LMR, Trunking, Marine, Aviation, Amateur radio, NOAA weather radio and packet data radio.