Ericsson Power Modules lowers inventory costs with ultra-wide voltage module for radio applications

E0184_PKU4116C.ovEricsson has introduced a new DC/DC converter module that has been designed to power radio-frequency power amplifier (RFPA) applications. Key to the new PKU4116C module is flexibility with its ultra-wide adjustable output voltage from 10V to 33V. This meets specifications as defined by the Antenna Interface Standards Group (AISG), which mandates a 10–30V input voltage range to power active RF antennas and base stations. In addition, the PKU4116C delivers power up to 100W and an output current of 3.3A, making it ideal to power RFPA applications that use semiconductor technologies such as Laterally Diffused Metal Oxide Semiconductor (LDMOS) or Gallium Nitride (GaN).
Benefiting from the ultra-wide output voltage, board power designers can significantly reduce inventory by adjusting the PKU4116C to specific voltages within the 10V to 33V range. Outputs can be interconnected in parallel when higher current is required, and in series to double the output voltage to power 50V or even higher power transistors. The combination of the wide output range and serial operation simplifies design and reduces time-to-market.
Available in an industry-standard sixteenth-brick footprint with dimensions of 33 x 22.9mm with a low-profile height of only 9.6mm (1.3 x 0.9 x 0.38in), the device delivers up to 100W of power and provides 93.1% efficiency at full load and 30V output, guaranteeing low power dissipation and reduced energy consumption. The PKU4116C series delivers outstanding thermal performance for applications that have limited airflow. The series delivers full performance up to 90°C with 3.0m/s airflow cooling and, in worse case conditions, full output power with natural convection up to 76°C.
“Whereas ‘central office’ equipment is primarily cooled via ventilation, RFPA modules need to employ thermal conduction via ‘cold wall’ techniques, exchanging heat with the external environment,” said Patrick Le Fèvre, Marketing and Communication Director of Ericsson Power Modules. “This requires that all components assembled inside the RFPA are design optimized for conduction cooling. The PKU4116C’s layout uses advanced techniques developed by Ericsson to drain the heat from components via ferrites interfaced to the cold wall.”
Operating over a 36V to 75V input-voltage range, the PKU4116C series is primarily designed for applications that are powered by a centralized 48V bus. However, due to its efficient and flexible power performance and large range of output voltage covered from 10V to 33V, the series is also suitable for a wide range of applications in industrial and process control, such as 28V electronic displays or the 12V bus commonly used in automation systems.
Offering an MTBF (Mean-Time-Before-Failure) of 5.2 million hours, the PKU4116C devices meets safety requirements according to IEC/EN/UL 60950-1 and offer input/output isolation of 1500V DC, making the unit suitable for telecom systems that use three-wire configurations. The PKU4116C also includes various protection features, including Output-over-Voltage Protection (OVP), input under voltage shutdown, Over-Temperature Protection (OTP), output short-circuit protection and pre-biased output. The PKU4116C series is available for both through-hole (PI version) and surface-mount (SI version) assembly.
photo credit: ‘Ericsson / Studio Phos’