Panel feed-through aids installation of PushPull connectors

HARTING - Han PushPull Power 4_0 connector with M25 threadsHARTING has extended its established PushPull connector family with a new panel feed-through component in robust plastic for mounting the Han(R) PushPull Power 4.0 connector in round panel cutouts with IP65/67 protection class. The round panel feed-throughs can be screwed into wall openings with M25 threads or mounted in circular wall openings with a diameter of 25 mm.

Round panel feed-throughs offer decisive advantages in situations where existing devices require a quick and simple conversion of a (non-pluggable) cable entry into a pluggable energy supply entry, while at the same time avoiding mechanical reworking of the housing wall.

In addition, round panel feed-throughs with PushPull locking offer advantages where an additional interface is required for an existing housing. In many cases the production of a round wall cutout requires less work.

The Han(R) PushPull Power 4.0 connector is suitable for power transfer at ratings of up to 690 V and 16 A. Wire gauges from 0.25 mm² to 2.5 mm² can be connected either without tools, using HARTING’s Han(R)-Quick Lock rapid termination technique, or with crimp technology. Five contacts are available in each insulated insert.

The connectors can be coded without loss of poles, in order to avoid faulty mating or confusion between several connectors. Further accessories include IP65/67 protective caps.